Cornelius P/N 629083204 Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Eiswürfelmacher Cornelius P/N 629083204 herunter. Cornelius P/N 629083204 User's Manual Benutzerhandbuch

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 5
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 0
1
620909401
March 1998
R
e
v
B
Revised: September 8, 1998
IMI CORNELIUS INC g One Cornelius Place g Anoka, MN 55303-6234
Telephone (800) 238-3600 Facsimile (612) 422-3246
ED150 K STYLE LID KITS,
P/N 629083204 AND 629083202
These K style kits apply to the following ice maker:
Ice Maker Width
Manitowoc Q320/420 22I
Table 1. Loose-Shipped Parts
Item
No. Part No. Name Qty.
1
52994 Cover, Gray (629083202) 1
1
52934 Cover, Black (629083204)
2 620027505 DF150 Ice Maker Lid Assembly 1
3 620027306 Bracket 2
4 70217 #8 Screw 6
5 50904 RTV 1
6 90221 Label 1
7 620909401 Installation Instruction 1
8 620701902 Acorn Nut, 8--32 Nylon 2
9 620701901 Sealing Washer 2
10 620037007 Baffle, Ice DF/ED150 1
11 621701903 #8 Nylon Washer 2
1. Unpack kit.
2. Insert a baffle assembly into the adapter lid.
3. Place (2) sealing washers (item 9) over studs and (2) flat washers (item11), then fasten in place with (2)
plastic acorn nuts (item 8).
4. Set ice maker lid on the top of the dispenser.
5. Using the slotted holes in the lid as a template, drill four (4) 9/64I diameter holes at the bottom of the slots
(see detail A). Use extreme care not to drill into the hopper. Fasten the lid to the dispenser with four (4) #8
sheet metal screws, two on each side.
6. Seal the ice maker to the top of the dispenser as follows:
A. Run beads of RTV around the opening in the lid and inside of the perimeter of the ice maker outline so
that the ice maker will set on the RTV.
Seitenansicht 0
1 2 3 4 5

Inhaltsverzeichnis

Seite 1 - P/N 629083204 AND 629083202

1620909401March 1998RevBRevised: September 8, 1998IMI CORNELIUS INC g One Cornelius Place g Anoka, MN 55303-6234Telephone (800) 238-3600 Facsimile (61

Seite 2 - 620909401

2620909401B. Set the ice maker onto the lid and position it as required.C. Wipe away the excess RTV.7. Remove the two rear screws (only) installed in

Seite 3

3620909401March 1998RevBRevised: September 8, 1998ICEMAKERDETAIL ”A”DETAIL ”A”ENLARGEDSEAL ICEMAKER TOITEM 2 WITH RTV334426DRILL 9/64” (.140” )DIA.HOL

Seite 4

4620909401VIEW Z--ZLINER OF LID2 PLCS.4 PLCS.8910112 PLCS.FIGURE 2. ED150 KIT

Seite 5 - VIEW Z--Z

5620909401March 1998RevBRevised: September 8, 1998891011VIEW Z--ZFIGURE 3. ED150 KIT

Kommentare zu diesen Handbüchern

Keine Kommentare