Cornelius SID650W/80-BC Betreibershandbuch PDF herunterladen (Seite 34)

31 91704

CLEANING/REPLACE THE FILTER

1. Remove the filter f rom the cabinet panel by sliding it forward toward the front of the unit.

2. Wash the filter in a solution of warm water and a mild

detergent. Do not use caustic detergents as they

may attack the aluminum filter elements.

3. Dry filter thoroughly.

4. For m aximum effectiveness, reactivate t he filter with an air f ilter coating (see Parts List, Miscellaneous

Components).

CLEANING THE CONDENSER

Air-Cooled Units.

1. Disconnect power to t he unit.

2. Remove the upper front and right side panel.

3. Remove all dirt/foreign material built up from the condenser fins (fan side). Be careful not to damage the

fins. It is recommended t hat a power vacuum cleaner with a “crevice”tool at tachment be used.

CLEARING EVAPORATOR FREEZE-UP

W ARNING: To prevent possible injury, do not place fingers or hand into ice maker nozzle or

hopper with power applied to the unit.

1. Open the hinged service door on t he upper lef t side panel.

2. Place the “Stop/Run”switch in the “Stop”position.

3. Close the water supply valve t o the ice maker.

4. Remove the ice drop and hopper covers.

5. Depress t he “Flush”switch push button and drain the evaporator.

6. Pour hot water into the evaporator ice exit opening. It will be necessary t o use either a f unnel or a container

with a spout. Fill the evaporator completely.

7. Drain the evaporator. Repeat steps 5 and 6 as required to ensure that all the ice in the evaporator is

melted.

8. Open the water supply valve. Depress the fill switch and refill evaporator.

9. Replace the ice drop and hopper covers.

10. Consult TROUBLESHOOTING GUIDE to determine cause of freeze-up before putting unit back in service.

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 40

Keine Kommentare

Cornelius SID650W/80-BC Betreibershandbuch Seite 34