
UC100 ProGate Operator’s Manual
Publication Number: 621054211OPR - 8 - © 2008-2014, Cornelius Inc.
certain that the auger slips into it drive pin. Auger transition cap will not assemble properly if the
auger is not seated on its drive pin.
11. Reinstall the two auger tube halves.
12. Replace the auger transition cap onto the auger and lock it down by snapping the retaining bail onto
the auger transition cap. Reinstall the tower cover.
13. Close the hopper access cover.
Figure 5
SPECIFICATIONS
Model: UC100 Progate
Ice Storage: 100 lbs
Electrical: 120/1/60, 3 amps total unit draw
CO
2
or Air: 100 psi max to unit regulated to 65 psi (4.48 bar) to Progate ice gate system
Dimensions: 24-3/16 in. Wide; 30-3/8 in. Deep
27 in. Below Countertop; 28 in. Above Countertop
AUGER TRANSITION CAP
AUGER TUBE BACK
AUGER TUBE FRONT
AUGER
RETAINING BAIL
Kommentare zu diesen Handbüchern